Home
Safe Cracker
Monster Bash
White Water
Revenge From Mars
Monopoly
Creature | |
Mummy Coffin Fix
The following fix is compliments of Steve Trischetta !
-
Remove the plastic shield from the Mummy assembly (two
screws) and set aside.
-
Get a piece of THIN corrugated cardboard and cut it to match
the shape of the right-side of the Mummy assembly bracket. Brown is probably
best, since it won't show against the brass(?) of the bracket.
-
Manually hold open the coffin and slide the cardboard
between the bracket and the coil shaft. Affix it in place with some magic
tape. Don't use "shiny" clear tape. It's not as
"invisible".
-
Reattach the plastic shield.
What you've done is make sure a little bit more of the metal
shaft is inside the coil, so when the coil activates, it "grabs"
better. You may notice that the coffin doesn't close completely. If the
cardboard is thin enough, the difference will be insignificant. To make the
cardboard thinner, I stripped a layer off it.
Since I made this change, the coffin has not failed to open once (in ~50 times).
|
